Jump to content

Used 19 escape sync 3.0 18093


Recommended Posts

So I just got an escape running v3.0 18093.  When I plug in my phone via USB android auto runs on my phone and says connected to the escape.  The screen in the vehicle flashes a couple times and tries to display maps, sometimes will show navigation for 5 seconds or so before it flickers again and the suv acts like no phone is connected via USB but my phone still says android auto is running and connected.  Please help.  It's not a USB cable issue, and I have a flash drive in the mail because wifi updates don't work either no matter how good of a signal I can provide.  Again please help

Link to comment
Share on other sites

1 hour ago, Prophet216 said:

So I just got an escape running v3.0 18093.  When I plug in my phone via USB android auto runs on my phone and says connected to the escape.  The screen in the vehicle flashes a couple times and tries to display maps, sometimes will show navigation for 5 seconds or so before it flickers again and the suv acts like no phone is connected via USB but my phone still says android auto is running and connected.  Please help.  It's not a USB cable issue, and I have a flash drive in the mail because wifi updates don't work either no matter how good of a signal I can provide.  Again please help

If you just got the vehicle, do a Master Reset if you have not already done so.  This will wipe out all of the settings from the previous owner(s) and let you start fresh.  If that does not help, I would get the system updated to the latest for your vehicle to see if the problem continues.

 

Sometimes, the hardware just needs a clean restart so removing the appropriate fuse or disconnecting the battery could help.  If you disconnect the battery, be sure to check your owners manual for things to be aware of when changing the battery.

 

You mentioned it is not a USB cable problem, but not sure how you eliminated that at a possible cause.

 

Wifi updates on Sync 3.0 are iffy at best. I just turned off wifi and always go with the USB update.

 

When you do the USB update, be sure to carefully follow the directions and ignore the early Update Complete messages.  Leave the USB inserted until the updates are really done and the system no longer restarts on its own.  The update can take about an hour or so depending on the vehicle.

 

 

Link to comment
Share on other sites

3 hours ago, Prophet216 said:

Did a system reset right away.  No help.  Have tried 6 different cables.  I just wonder if updating sync will even fix my android auto issue.  It runs on my phone but not the car

 

As alcohenusa advised, download the latest SYNC version for your vehicle from the Ford SYNC 3 Update Website and install it in your Escape via USB flash drive.

 

Let us know the outcome once you have done that.

 

Keep us updated and good luck.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...