Jump to content

Siri issues after SYNC upgrade


Recommended Posts

iPhone 6S IOS up to date

2014 Ford Fusion (no mytouch)

I had a SYNC malfunction that required a restart and upgrade from SYNC 4.2 to 4.6. Since the upgrade, Siri no longer works on my car. It will interrupt my audio (radio, phone call, phone audio) but Siri does not respond to my voice. Phone calls work well over bluetooth, so it seems like this is a specific issue with Siri. Has anyone else experienced this issue? Siri was probably my most used feature of the Sync service and it has been frustrating paying money to lose it. Any help would be appreciated.

Link to comment
Share on other sites

Can confirm this myself (2010 Mariner Hybrid with Nav). I installed 4.6 last night and saw this exact same behavior. Prior to 4.6, when you invoke Siri on a paired phone, Sync engages the bluetooth headset profile to allow you to interact with Siri over the car speakers and use the Mic built into the car. After 4.6, Siri still is trying to route audio to Sync but Sync no longer engages the headset profile. As a result, you can't give any commands to Siri. It just sits there waiting.

 

And to be clear, I tried master reset, fuse pull, the new "Sync Reboot" feature, clearing the BT pairing from both phone and car, rebooting phone, trying a different phone, etc. It is 100% a bug with 4.6. I still have the 4.4 installer for my vehicle and was able to downgrade to 4.4. As soon as I did that, Siri worked again.

 

See here other reports of the same exact thing. Also affecting a Windows phone user with Cortana so it's not an iPhone problem:

 

http://www.f150forum.com/f38/sync-update-v4-6-dl3t-14d544-ag-341883/index11/#post5009937

https://www.reddit.com/r/Ford/comments/58q9v3/ford_sync_46_update_killed_siri/?

Edited by bookemdano
Link to comment
Share on other sites

It does appear to be possible to downgrade back to the previous version of Sync (at least it was for me). BUT this depends on you having the installation files for that version. If this is the first Sync update you ever did then you wouldn't have the install files for the previous version. In that case you'd have to find someone online who has the same (or similar) vehicle who does have the older installation files. Maybe you could post in this thread (or start a new thread) here http://www.focusfanatics.com/forum/mk3-focus/564082-sync-4-4-1-available.htmlasking if someone can send you the 4.4 installer for the 2014 Focus.

 

The dealer could probably install the older version also, although this would likely cost you some money.

 

So 4.6 didn't fix the biggest bug of 4.4 (not staying on Bluetooth Audio after the ignition is cycled) and it breaks Siri completely (unless you unpair the phone or turn off bluetooth on the phone). I wish Ford would start up a beta testing program for Sync updates. It seems like these releases aren't being tested fully before they are released.

Edited by bookemdano
Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...

I did this update last week, Ford Sync basic on my F150. The phone works fine for calls and it now alerts me to text messages which it did not do before.

 

I use to be able to use the Hey Siri system for directions, read texts and to initiate phone calls. When I call out " Hey Siri "now the system freezes.

 

If the phone is unplugged from the USB It works fine but I cannot use the Hey Siri feature then. I have to push the home button on my phone which is illegal

 

The update basically made the sync system in my truck useless except for recieving phone calls. Ford basically made the Sync system in my truck useless.

 

I'd rather go back to the older 4.4 version .

Edited by Derek Raine
Link to comment
Share on other sites

I am having the exact same issue on my wife's 2015 fusion se. She used to be able to say "hey siri", which would prompt siri. My wife would then use her like normal. Now when she says "hey siri", it prompts siri but then does not enable the car mic. This also disables the phone mic. How can I downgrade her fusion back to the old version?

Link to comment
Share on other sites

I still haven't found any answers. I'd be happy to hear any suggestions or if anyone has an old version for download. It really is pretty incredible how terrible the SYNC system is overall. It's not intuitive AT ALL and with every update they just seem to screw it up more. Who is getting paid to make a hands-free function LESS hands-free?

Link to comment
Share on other sites

  • 4 weeks later...

Update... I got my hands on an iPad still running iOS 9.3.2. I tried it in my SYNC 4.6 system and had the same problem.

 

Cara, do you have any recommendations? This change makes it very difficult to use the phone while moving.

 

To be clear, this is not the Siri Eyes Free feature; in upgrading to 4.6, we have lost the ability to use Siri directly from the device while connected to SYNC.

Link to comment
Share on other sites

Same issue here with 4.6. Spoke with support and they will not acknowledge that 4.6 affected Siri in any way. It obviously has. They also claim it is not possible to downgrade to an earlier version.

 

Ford just doesn't want to address this. If they had mentioned in the release notes that the update would disable Siri, I would not have installed it. The only thing I needed from the update was the ability to reboot without disconnecting the battery or fuse.

 

Come on Ford... get back to us on this.

 

2011 Mariner

2013 Edge

Link to comment
Share on other sites

berserk_1980:

 

I'd call the dealer first so you don't waste your time going there for nothing. When I contacted Sync support, they claimed there was no way to roll back. I just rolled back my second vehicle with no problems since I had the old 4.4 downloads. I would make sure your dealer can/will get the correct version for your vehicle to roll back. You'll need to re-pair any phones.

Link to comment
Share on other sites

berserk_1980:

 

I'd call the dealer first so you don't waste your time going there for nothing. When I contacted Sync support, they claimed there was no way to roll back. I just rolled back my second vehicle with no problems since I had the old 4.4 downloads. I would make sure your dealer can/will get the correct version for your vehicle to roll back. You'll need to re-pair any phones.

Well sure. I go there about once a year for an oil change. I'll ask them then. I'm surprised/disappointed your dealer didn't try to work this with Ford.

 

I know Ford doesn't want us to downgrade, but it would be nice to hear that they're working on 4.7 or whatever and maybe even give us an ETA window.

 

I wonder if one could perform a downgrade by purchasing a SYNC module, perhaps from a similar vehicle in a junkyard.

Link to comment
Share on other sites

  • 5 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...