Jump to content

Multitask

SYNC Members
  • Content Count

    817
  • Joined

  • Last visited

  • Days Won

    26

Everything posted by Multitask

  1. Multitask

    What version of sync is this???

    From the looks of it , you are from a right side driving place.... and it could be Sync 4, but it will depend on what vehicle you purchased... as was said, you should contact your dealer to see what it is supposed to be
  2. Multitask

    SYNC3 v3.4.21020

    Just came out Sunday the 2nd. For the Lincoln's anyway, I believe for the Fords that have 3.4, it is also out... for most.... go to owner.ford.com or owner.lincoln.com and see if you have an update waiting.
  3. Multitask

    Reset bluetooth Frenchi

    Typically the Reset is in the Settings area... once you can navigate to that area, you should be able to find it.... if it is not allowing you to get there, then something is wrong, and you will have to get the dealer to show you... while I know where it is in my car, I'm sure the dealer would be most helpful tin directing me to that If they will not, then take it to another dealer... the owner.fole.com site has a lot of info (or what ever it would be in your area)
  4. Multitask

    Reset bluetooth Frenchi

    That is information from the Ford site... talk to your dealer for more info.
  5. Multitask

    Reset bluetooth Frenchi

    THose are not for the touch screen, they are for the 'hard' buttons
  6. Multitask

    Reset bluetooth Frenchi

    How to perform a master reset Press the PHONE hard button. Select the 'Settings' tab on the touchscreen. Select 'Advanced'. Scroll using the seek buttons on the touchscreen and select 'Master Reset'. SYNC will ask you to confirm. Press 'YES' to continue. SYNC will confirm when the master reset is complete.
  7. Multitask

    Reset bluetooth Frenchi

    https://owner.ford.com/support/how-tos/sync/sync/setup/how-to-master-reset-sync-systems.html
  8. While I know what that site is, I have not been there in a very long time... maybe a year or two... so I doubt it... While were on it... this is public so I'm not going to Mind it .... and also , I don't like that you are calling me a lier!!
  9. Good For You... my 2020 MKZ with 3.4 has not had any issues either....
  10. https://www.thethings.com/18-glaring-problems-with-gm-cars-everyone-keeps-ignoring/ http://www.chevroletproblems.com/ Tho they might not be what you are talking about , Ford is not the only company with issues... ๐Ÿ˜Ž
  11. Multitask

    Is there new map update....#20

    Still says 1-19 for me... and I have it already
  12. So the car runs fine, but you will not buy it because the app does not work? ugh....
  13. Oil life would be nice... but the O, I can look at my car for that. ๐Ÿ˜Ž The Lincoln App for me wasn't working for a while... crash, or it kept thinking I was in Detroit... took them 4 months to get it so it was working again... So maybe in a few months it will for you.
  14. not a big loss... I never used it anyway.....
  15. Probably still using Windows XP, or System 9
  16. Multitask

    File Not Found

    doubt you'll get a response from Ford on this.... What do you have, what are you attempting to do?
  17. Multitask

    Updating to 4.6

    it might be 3... it's been a few years since I've done that... like I said, make sure it's USB 2, not 3.... I've tried a few USB3s that I have, and none work... so I always use a USB 2.... slower but it works. Sync 2 can be very picky....
  18. Multitask

    Updating to 4.6

    Make sure you are putting the files and folders on a USB 2 flash drive, not a USB 3 drive... there can be issues there. there are 2 files, and one folder also , make sure there is nothing else on it... and it's formatted as fat32 or exFAT
  19. Multitask

    voice recognition not ready 2016 ford sync 3

    Deleting the app, doing a reset of the Sync 3, and reinstalling it might work https://www.ranger5g.com/forum/threads/how-to-master-reset-sync-3-to-setup-activate-ford-pass-app.1859/ From a truck forum, but the same principle applies
  20. Multitask

    voice recognition not ready 2016 ford sync 3

    Yup, my brain was still thinking of the 2016 from the OP... and yes, a reset, or a visit is needed... Hard to believe it has been that long already...
  21. Multitask

    voice recognition not ready 2016 ford sync 3

    again... a 2017 will not have Sync 3, unless you did the hardware upgrade.... Even with that, I've seen that you might have to install the files again... or it was not programed right....
  22. Multitask

    New SYNC 3.4 update available

    The VHR is no more.... Ford got rid of it over a year ago....
  23. Yup, but putting it back will tell him if it's his changes... if it still does not work... then he knows it's not his changes
  24. Multitask

    Fail to Sync 3 Update

    3.3 and 3.4 came with the 2019's and beyond (some 2018's) and yes there is a way, but Ford does not cover it. So you would be on your own for that if you decide to go that route. and now the 2021/22's will be 4.0 (TBD on which ones) Oh, and as far as WiFi, just go into the settings and turn off the Wifi, or at least the requesting to use it. ๐Ÿ˜Ž
  25. Multitask

    Fail to Sync 3 Update

    Download the file unZIP the file to where you know it is. you should get 1 file that has content, and 1 file that is a 0K file ( both are ok ). autoinstall.lst and DONOTINDX.MSA then you should get a SyncMyRide folder with files in it, leave them all alone. If you are on a Mac, it will work, you just need to Create the SyncMyRide folder and drag the contents of the SyncMyRide\filename.tar..... (etc) files into it, and rename them to just the file names, minus the SyncMyRide\. (don't do anything to the other 2 files) On Windows it seems to be ok when unpacking the .zip file you get from Ford/Lincoln On a USB stick (some have luck with 3.0 sticks, most have better luck with 2.0 sticks, what ever works for you). format is exFAT (Or Fat32) ONLY have the 2 files and the folder (with other files) on it... it is safer this way. (do this in an open area so you don't get exhaust) insert the USB stick, start your car... let it got for 20-30 minutes (or till it tells you it is ok to take out the flash drive, you can leave it in there long after just in case) You might have to open the door, and wait a minute then close it.... it should finish, and the verion should show up.... sometimes it takes a minute or two to show up (being you started with 3.0, it will stay 3.0. just the revision will change (3.0.xxxxx to 3.0xxxxxx)
×